DimLux Maxi Controller EVO DATALOG

DimLux controller for up to 160 lamps of the DimLux Extreme or Expert Series.

With USB for the evaluation of your values on the PC

Standard with 5 m long interlink cable

More details

Art. Nr.:KLIDIM01D

469,95 €

- +

 
More info

This revolutionary controller can control up to 160 DimLux Extreme or Expert Series and can be expanded with various sensors to achieve consistently optimal conditions. With USB for later evaluation of values and events.

The DimLux Maxi Controller EVO 1.2 is supplied with a 5 meter interlink cable. You can also use an extra long 10 meter interlink cable. You can get this separately here in the shop: DimLux interlink cable 10m

The use of one or more DimLux ExpertSeries lights combined with the DimLux Maxi Controller has many advantages:

  1. Extensive and precise setting options
  2. Sensors: Measuring = Knowledge
  3. Better lighting hardware performance
  4. Extensive connection and control options
  5. Maximum light output
  6. Simulation of sunrise and sunset
  7. All-in-one security unit
  8. Two-room installation

Extensive and precise setting options

The DimLux Maxi Controller has no less than seven dimming settings that allow you to control the light output, the CO2 content of the air, the humidity and the temperature of the room. Furthermore, the DimLux Maxi Controller additionally an infinitely variable dimming adjustment to achieve your desired light setting exactly. By pressing the + or - button you can set the desired brightness or you can choose a target temperature and let the DimLux Maxi Controller the controls. If the preset temperature is exceeded, the light is dimmed or partially switched off until the set temperature is reached again. It couldn't be simpler!

EVO DATALOG

Sensors: Measuring = Knowledge

The following sensors provide the Dim Lux Maxi Controller reliable values:

  • Temperature sensor
  • Co2 sensor
  • Air humidity sensor
  • Plant temperature sensor

The values determined by the sensors are taken from the Dim Lux Maxi Controller combined to create an optimal relationship between temperature and humidity. This enables maximum plant growth.

Extensive connection and control options

A single DimLux MaxiController controls up to 160 DimLux luminaires (2 x 80 pcs.) Two DimLux Expert lighting systems can be connected directly to the DimLux MaxiController via interlink cable. Separate timers and relays are not necessary.

Simulation of sunrise and sunset

After a night phase, plants only start their photosynthesis when the ambient temperature has also reached a certain value. If the change from night to day phase is made too quickly, this daily stress has a negative effect on plant growth. The resulting sudden change in temperature can lead to condensation moisture on the plants. Condensation moisture favors decay and mold growth. This is prevented by the DimLux Maxi Controller by slowly switching the DimLux lights on and off.

Energy saving = cost savings

The combination of a DimLux lighting system with a DimLux Maxi Controller reduces the required inrush current of up to 160 amps to a maximum of 60 amps in conventional systems. This saving is made possible by the Softstart technology. This saving, which at first glance appears small, becomes all the more relevant the more luminaires you use.

Datalogger

The EVO DATALOG can be used together with a USB stick to store all the values and events measured by the controller and to display them later in graphic form on a PC. The controller stores the values every minute on the stick.

Show all products by Dimlux

 
Data sheet
EAN 4260587873787

Write a review

Question (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form

Customers who bought this product also bought:

19 other products in the same category: