Lumatek Pro 600 W Controllable

High quality ballast from Lumatek to control your lamps. Suitable for sodium vapour lamps (HPS) and metal halide lamps (MH).

  • 400-600 W
  • 240 V or 400 V
  • 5 m cable
  • 5 years warranty
  • TRS interface for connection to the Lumatek Digital Panel

Please note: This article is only available on customer order and only if at least 25 ballasts are ordered!

More details

274,95 €

- +

 
More info

The Lumatek Controllable ballast is suitable for use with sodium vapour lamps and metal halide lamps and is superior to most of its competitors on the market in terms of energy efficiency. It runs extremely quietly and generates refreshingly little heat for a ballast of this class. At the same time, the Lumatek Controllable achieves a higher output of photosynthetically active radiation compared to other devices, thus strengthening the growth of your plants

The ballast unit automatically detects the lamp you have connected and immediately controls it according to the settings you want. The device has 4 different settings (400 W to 600 W) and can also be switched between the different levels during operation (this creates a transition phase of approx. 10 min)

With the Lumatek Pro Controllable you get a high quality high frequency ballast (120 KHz at 400 V; 90 KHz at 240 V) that provides optimal lighting conditions for every phase of your plants. It provides complete circuit protection against short circuits, overtemperature, over- or undervoltage, lamp end of life, rectification and EMI suppression.

The TRS interface allows you to connect to the Lumatek Digital Panel, allowing you to control all areas of your grow room or box efficiently and conveniently, be it lighting, temperature, timing and much more. The Lumatek Digital Panel even allows the light to be dimmed in 1% steps from 40 to 110%.

Please note: This article is only available on customer order and only if at least 25 ballasts are purchased!

Technical details:

  • Input power: 630 W
  • Power output: 600 W4 Switching stages: 250 W, 400 W, 600 W, 600 W Superlumen +10%
  • Input voltage: 240 V at 50/60 Hz
  • Voltage range depending on version
  • Input current (max): 2.70 A
  • Power factor: > 0,99
  • Efficiency: 96%
  • Light source: 250 W 400 W , 600 W HPS or MH
  • Total Harmonic Distortion (THD): < 8%
  • Lamps CCF: < 1.7
  • Operating frequency: High frequency
  • Ambient temperature at full load operation: -25 bi 40° C
  • Housing temperature rise: 35° C
  • Protection class: > IP23
  • Operation at a relative humidity of 0 to 90%, non-condensing
  • 310 mm length x 114 mm width x 81 mm height
  • Weight: 2.7 kg (240 V) / 3.9 kg (400 V)

Show all products by Lumatek

Write a review

Question (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form

19 other products in the same category: