ProsystemAqua's pH&EC Basic Control

Automated ph & EC controller for aquaristic and hydroponic systems

  • comes pre-installed
  • Volume flow pH: 40 ml/h
  • Volume flow EC: 500 ml/h
  • including feed pump & calibration solutions

More details

Art. Nr.:DUNCOM91

890,00 €

- +

 
More info

ProsystemAqua - up-and-comer from Spain

ProsystemAqua is a manufacturer of reliable and accurate fertilization and irrigation computers. Despite its comparatively short history, the Spanish company has managed to secure its place on the European and global market.

This has been achieved not only through the high quality of the controllers produced, but also with the help of the wide range of products offered, from small pH pumps to expandable fertilizer systems that can be controlled and managed via laptop.

By recruiting engineers and developers of every stripe, ProsystemAqua has acquired an expertise that serves as a guarantee of satisfaction for its customers

Always on the lookout for innovative ideas and optimized processes, the manufacturer regularly offers new solutions to the challenges of irrigation technology.

pH & EC Basic Control

Picture: Schematic representation of the system

One of these solutions is the "Basic" controller, with which you can automatically monitor and adjust the pH as well as EC balance of your nutrient liquid. This controller has been specially developed for use in medium-sized irrigation systems and offers you a reliable and functional way to transfer your water quality requirements to your reservoir without much effort.

A pump delivers the liquid from your tank into the pipes of the controller system, where it is analyzed, adjusted and then returned to the water reservoir

The heart of the system consists of two electrically controlled peristaltic pumps that constantly supply your solution with regulators. The correct quantity is determined by sensitive pH and EC sensors that meticulously control the values of your nutrient solution. In addition, the controller monitors the flow rate with which your liquid is conveyed through the system, so that the supply of fertilizer and pH regulator can be adjusted at any time.

The supplied feed pump includes a filter and protects the pipe system of the "Basic Control" unit from dirt and damage.

The setup as well as the handling of the unit is simple and easy to manage:

  1. The system is delivered pre-installed; you only have to connect the inlet and outlet hoses to the system lines
  2. The next step is to set up the pH pump in three simple steps:
    1. Set the desired pH value of the nutrient solution in the liquid reservoir
    2. Tell the controller if you will use a pH minus or pH plus regulator
    3. Calibrate the sensor
  3. The setup of the EC pump is almost analogous
    1. Set the EC value you want to use
    2. Check the temperature compensation and the timer
    3. Calibrate the sensor

Your peristaltic pumps are now set up and ready to be started. Make sure that you turn on the circulation pump in your liquid reservoir at the same time as the controller. Once your system is running, check its functionality:

  1. The feed pump should supply the system lines with nutrient solution
  2. Your sensors should detect pH and EC balance of the liquid
  3. The peristaltic pumps should feed the fertilizer and regulator

You can find more information about the setup and the functionality in the user manual. You can also contact our customer service - we are happy to help you!

Scope of delivery

In addition to the control unit with peristaltic pumps, piping systems and sensors, you will also receive with the delivery:

  • a feed pump
  • Connections for your nutrient solution hoses
  • Calibration solutions for pH and EC sensor
  • Hoses for the peristaltic pumps

Please note that you will need to purchase inlet and outlet tubing as well as a circulation pump to mix your nutrient solution separately to the controller.

Note: ProsystemAqua offers a two-year manufacturer's warranty on all of its products. This does not cover damage due to application errors.

Technical data

  • Weight: 6 kg
  • Length: 60 cm
  • Width: 40 cm
  • Depth: 25 cm

Show all products by Prosystem Aqua

 
Data sheet
EAN 4260587874494
Controlling of pH-Wert
Controlling of EC-Wert

Write a review

Question (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form

8 other products in the same category: