DimLux Maxi Controller EVO

Controls up to 160 Dimlux fittings. The following sensors can be connected: Temperature, humidity, plant temperature, CO2

More details

Art. Nr.:KLIDIM01

279,95 €

- +

Produktvideos

 
More info

This controller can control up to 160 DimLux Extreme or Expert Series fixtures and is expandable with various sensors.


The use of one or more Dimlux Expert Series in combination with the DimLux Maxi Controller has a number of great advantages:

Comprehensive and precise settings In addition
to 7 dim options, the Dimlux Maxi Controller adjust the light output to the temperature of the room. This also facilitates the transition from step dimming to continuous dimming, making it even easier to achieve the perfect light setting. This is possible by pressing the + and - buttons (brightness), but it is also possible to set the desired temperature and adjust the rest to the Maxi Controller...to leave. If the set temperature is exceeded, the lighting is automatically dimmed or even partially deactivated. It doesn't get any easier!

Sensors: measure = know
There are several sensors available, which are based on the DimLux Maxi Controller can be connected. A temperature sensor and humidity sensor can be combined with a plant temperature sensor for optimal plant growth. The values obtained from the temperature sensor, humidity sensor and plant temperature sensor are then analysed and combined so that at the optimum ratio of ambient temperature, the relative humidity of the environment, plant temperature and vapour pressure deficit are controlled.


Extensive connection and control options
A single DimLux Maxi Controller can control up to 160 DimLux Expert Series lighting systems (40 pairs). Two Dimlux Expert can be connected directly to the DimLux Maxi Controller be connected, several lighting systems should be connected linearly (daisy-chain) to the first two. Furthermore, the DimLux and DimLux Maxi Controller can be connected directly into the wall, without relays, timers and timers. This is safer and saves costs.


Simulation of sunrise and sunset
plants do not use photosynthesis until a certain temperature is reached, if the lights are switched on after a dark period, this can be exhausting and full of affect growth, condensation can be formed and this can cause rot. This can be prevented by simulating sunrise and sunset Dimlux Maxi-Controller so that the DimLux lighting systems are slowly switched on and off.

Energy and cost savings
When a Dimlux lighting system is installed on the DimLux Maxi Controller is connected, this ballast is the only ballast without inrush current. A typical output current range of 50 to 160 amps per digital ballast. Newer digital ballasts with soft start technology limit the inrush current to 50 to 60 A. This appears to be a small but will be multiplied by the number of ballasts (160 for example), this is a significant amount of energy savings.

Show all products by Dimlux

 
Data sheet
EAN 4260587870199
Article category High End
Growth phase of the plant Combi (growth and flowering)
Adjustable Yes
Controlling of Air humidifiers and dehumidifiers
Controlling of Heaters
Controlling of AC fans
Controlling of Supply air
Controlling of Lamps
Controlling of CO2 valves
Controlling of Exhaust air
 
Download

Operating instructions Maxicontr

Operating instructions for Dimlux Maxicontroller

Download (1.99M)

Write a review

Question (0)

No customer questions for the moment.


Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form

Customers who bought this product also bought:

18 other products in the same category: