OptiKlimate PRO3 15000 Inverter

Water-cooled air conditioning unit from OptiClimate with innovative inverter technology

No outdoor unit required.

Cooling capacity: 15 kW

More details

Palettenversand Art. Nr.:KLIOPTI1

5 989,90 €

- +



More info

The OptiClimate 15000 PRO3 Inverter is a water-cooled air conditioning system. It provides perfect air conditioning and has a cooling capacity of 15 kW. The OptiClimate 15000 PRO3 inverter uses 5-9 litres of water per minute and has 3x 2700W heating elements. The OptiClimate is an air conditioning system developed completely in-house. This has resulted in an optimised, efficient product that allows the climate to be controlled to perfection with the lowest possible energy consumption.

The OptiClimate is the only complete solution for controlling your indoor climate. It can simultaneously cool, heat, dehumidify, filter and circulate the air. You are no longer dependent on outside temperatures and create the optimal climate in summer and winter. Even during a heat wave ideal temperatures are reached. The OptiClimate ensures optimum air distribution in the room, resulting in an even temperature. The temperatures can be adjusted to your ideal needs and maintained continuously

Water cooling
The water-cooled OptiClimate uses water as a cooling medium to cool the air and heats using ceramic heating elements. The OptiClimate has a water inlet and outlet.
The inlet is connected to the water supply system. The cold water is used to cool the air and is heated to 35 to 50°C. The heated water is then drained off via the water drain or recycled. Ideal for cooling objects near water sources such as buildings on waterways, houseboats, yachts, swimming pools or greenhouses. The water-cooled OptiClimate is also perfectly suited for listed buildings where no outdoor unit may be installed.
You have a house with a swimming pool? Then you can use the water-cooled OptiClimate to cool your house and heat the swimming pool.

Air-cooled with outdoor unit (split unit)
The air-cooled OptiClimate (OptiClimate Split) works on the same principle as the water-cooled version. However, the OptiClimate Split uses air instead of water as a coolant. The OptiClimate Split has an external outdoor unit (Split-Unit), which is installed at a maximum distance of 30 metres. The split unit is supplied with flexible hoses and quick couplings. The help of a refrigeration engineer is not required for installation. The split unit can be easily decoupled again.

Avoid pollutants and unpleasant odours
The built-in, lightweight dust and carbon filters keep the internal components dust-free. Volatile organic compounds (VOC) and unpleasant odours are absorbed, e.g. solvents, softeners, cooking and food odours, smoke and sweat odours. The dehumidification function also prevents musty odours caused by condensation in case of mould formation.

Dehumidification of the air
The dehumidification function of all other (water-cooled) air conditioners on the market works on the basis of cooling. During cooling, the air is dehumidified, which is a natural process. However, if there is little heat in the air, the desired temperature is quickly reached and the air conditioning stops. Cooling and dehumidification. This keeps the air humidity high. In contrast to competitor models, the OptiClimate has the unique feature of being able to dehumidify even when the desired temperature has already been reached.

Dehumidification with the PRO3
The OptiClimate PRO3 dehumidifies by continuously achieving the right balance between heating and cooling. When the desired temperature is reached, the dehumidification process is stopped. The dehumidification performance of the PRO3 is more than sufficient for most applications. This is 1.5 to 2 times higher than for an average building dryer.

Dehumidification with the PRO4
The PRO4 has the innovative property of continuously dehumidifying with its own heat, even without cooling the air - so it also dehumidifies when the set temperature is reached. Fluctuations in humidity are thus almost impossible. This results in very low energy consumption. The PRO4 does not use water during dehumidification. If used frequently, the PRO4 will quickly pay for itself through the electricity and water costs. The dehumidification function of the PRO4 is unprecedentedly powerful and highly efficient. The dehumidification performance is 2 to 3 times higher than with an average building dryer.

Operation and alarm with remote control
The latest OptiClimate models (from 2015) have an alarm output as well as a communication port. After purchasing an external module, you can remotely control and read out the OptiClimate with a computer or smartphone.

The inverter technology ensures an even regulation of temperature and humidity. With the aid of the inverter, the OptiClimate can continuously and continuously adjust the temperature to the set temperature. The OptiClimate inverter reacts directly to the smallest differences between the set and actual temperature. The inverter technology prevents the compressor from being switched on and off several times, so that no current peaks occur. Therefore, the OptiClimate inverter consumes less water and electricity and generates uniform temperatures and humidity. This technology also has a soft start. The speed of the compressor is gradually increased and thus a high starting current is avoided
The OptiClimate inverter has the unique feature that it is multi-phase. The compressor can be connected to 230-240V single phase and 400V three phase.

Technical data:

  • Name: OptiClimate 15000 PRO3 Inverter
  • Cooling capacity: 15 kW
  • Dimensions: 121 x 70 x 54 cm
  • Weight: 160 kg
  • Water consumption: 5 to 9 litres per minute
  • Voltage: 230 V or 380 V
  • Power consumption: 3100 W
  • Heaters: 3x 2700 W
  • Phases: 1 or 3
  • Dehumidification capacity: 270 l / 24 h (at 80% humidity at 30°C)
  • Split unit: No

Requirements electrical connections:


  • for 1 phase: 6.0 mm²
  • for 3 phases: 4.0 mm²

Miniature circuit breaker (MCB)

  • for 1 phase: D50
  • with 3 phases: D35

Requirements Water connections:


  • Copper: 15 mm (for total cooling capacity above 15 kW: 20 mm)
  • At high pressure 15 mm up to a total cooling capacity of 30 kW
  • LDPE: 16 mm (for total cooling capacity above 15 kW: 20 mm or 25 mm)
  • Water drainage

Show all products by OptiClimate

Data sheet
EAN 4260587873732
Shipping Shipping by forwarding agent

Write a review

Question (0)

No customer questions for the moment.

Your Question has been successfully sent our team. Thanks for question!
Ask a question
hide form

9 other products in the same category: